Sigma Blade Mixer Vacuum and Deaeration

Sigma blade mixers are also used for high-intensity mixing and compounding of solids including rubber, carbon, powder metals and ceramics.

By designing the sigma blade mixer for vacuum, high viscosity materials can be mixed and deaerated at the same time. This is very important for mixing and processing high performance adhesives, silicon and rubber.

Sigma Blades of a Sigma Blade Mixer




Click to request a sigma blade mixer online or call 630-350-3012 to speak with an expert at Paul O. Abbe® to help you determine which design and size sigma blade mixer would be best for your mixing process.

 

See our Mixing & Blending Options

Rota-Cone Blenders

Tumble Blenders include the original ABBE Rota-Cone® Double Cone Blender and the Rota-V Blenders. Tumble blending offers the lowest shear method of mixing friable or delicate solids. The simple double-cone or V-designs provide complete discharge. Because there is no agitator there are no seals and they are easily inspected and cleaned. For these reasons, Tumble Blenders are often employed by the food and pharmaceuticals industrie (more...)

Rota-Vee Blenders

Vee Tumble Blenders provide a low shear method of mixing friable or delicate solids. The simple V shape design provides complete discharge.  Tumble Blenders are often used in the food and pharmaceuticals industries. Materials: Stainless Steel, Carbon Steel. Sizes: 10 to 200 cubic feet (more...)


Dual Shaft Ribbon and Paddle Mixers

Materials: Stainless Steel, Carbon Steel. Sizes: 3.25 to 260 cubic feet Design Options: • Liquid Addition • Polished Contact Surface • CIP - Clean-In-Place Spray Nozzles (more...)

Double Arm Mixers

Double Arm Mixers are based on a combination of 100+ years of ABBE rugged reliability and the latest Aaron Process Double Arm Mixer designs. These mixers are used for mixing plastics, rubber, adhesives, mastics up to 10,000,000 centipoise and solids such as carbon paste, powdered metals and ceramics. Double Arm Mxiers can be jacketed and vacuum rated for drying. Mixer discharge is tilt or bottom dump valves. Our mixer/extrude (more...)


Double Arm Mixer Extruders

Double Arm Mixer Extruders are based on a combination of 100 years of ABBE rugged reliability and the latest Aaron Process Double arm Mixer designs. These mixers are used on plastics, rubber, adhesives, mastics up to 10,000,000 centipoise and solids such as carbon paste, powdered metals and ceramics. Double Arm Mxiers can be jacketed and vacuum rated for drying. Discharge is extrusion screw.  (more...)

CrossMix® Fluidizing Mixer

The CrossMix®  is a twin-paddle mixer that gently lifts and fluidizes solids in a weightless zone where particles of any size or shape can move freely and mix rapidly. Mixing can be completed in as little as 7 to 20 seconds. The CrossMix® is most beneficial for solids that require very high homogeneity, are fragile such a (more...)


Ribbon and Paddle Blenders

Paul O. Abbe Double Ribbon Blender designs and manufacturers new ribbon blenders and are ideal for mixing dry free-flowing solids with bulk densities up to 90 pounds per cubic foot (1.45 g/cc). Ribbon blender are used for all dry foods products, nutraceuticals, protein powder mixes, dry juice mixes, chemicals, fertilizer, insecticides, colorants, resins and polymers. The moderate shear of the ribbon or paddle naturally breaks down lumps an (more...)

Laboratory Mixers

Aaron Process LNG Laboratory Mixers are available in working capacities from 1/4 gallon to 2 gallon. 1/4 gallon and 1 gallon models are available from stock and furnished with variable speed drives, stainless steel construction and jackets as standard. These units are ideal for research and development, testing new raw materials or scaling up production size batches (more...)