Ribbon Mixer Blending Bulk Density

Ribbon mixer are generally designed to operate with solids of bulk densities of 75 lbs./ft3 or less. This keeps us for the most part in the realm or organic products. Minerals and powdered metals have bulk densities of 90 lbs./ft3 to 500 lbs./ft3 and are better suited to mixing in tumble blenders, not only due to the higher horse powder required, but also due to the abrasiveness of the inorganic solids. Many oxides of metals such as ZnO will be of sufficiently low bulk density to be mixed in the ribbon blender. Don’t assume the bulk density by a products description alone. For instance, spice mixing may involve a very low bulk densities product and would be ideal for a ribbon blender. But, a spice blend based on salt, a mineral, may have a bulk density of 84 lbs./ft3.

Bulk density is extremely important but it should be recognizing that it comes in two forms; tapped and untapped.

Tapped bulk density is the fully settle and, consequently, highest density of a finely divided solid. Tapped bulk density, as the name implies, is the density obtained after a container of the solids is tapped repeatedly or vibrated to induce settling of the solids. This is the type of action that occurs during transportation of the solids in containers, drums or bags.

Untapped bulk density is the minimum density and will cause the solids to occupy the greatest volume. When the two densities differ significantly, care must be taken when considering the working volume of the mixer. It would be safe to use the highest density for power calculations and the lowest density for the total working volume. The variance between tapped and untapped density is most affected by the absolute density of the solids, particles size and shape. Heavier, symmetrical and large particles tend to settle quickly without vibration, but light, irregularly shaped and finely divided organic solids such whey protein powders can vary in bulk density by as much as 50%.

For special mixing applications such as powdered metals or friable materials, consider our Rota-Cone® Blenders or CrossMix® Fluidizing Mixers.

For viscous or heavy paste mixing we offer Double-Arm Mixers & Extruders.

Ribbon Mixers



Click to request a ribbon blender quote online or call 630-350-3012 to speak with an expert at Paul O. Abbe® to help you determine which design and size ribbon mixer would be best for your mixing and blending process.

 

See our Mixing & Blending Options

Rota-Cone Blenders

Tumble Blenders include the original ABBE Rota-Cone® Double Cone Blender and the Rota-V Blenders. Tumble blending offers the lowest shear method of mixing friable or delicate solids. The simple double-cone or V-designs provide complete discharge. Because there is no agitator there are no seals and they are easily inspected and cleaned. For these reasons, Tumble Blenders are often employed by the food and pharmaceuticals industrie (more...)

Rota-Vee Blenders

Vee Tumble Blenders provide a low shear method of mixing friable or delicate solids. The simple V shape design provides complete discharge.  Tumble Blenders are often used in the food and pharmaceuticals industries. Materials: Stainless Steel, Carbon Steel. Sizes: 10 to 200 cubic feet (more...)


Dual Shaft Ribbon and Paddle Mixers

Materials: Stainless Steel, Carbon Steel. Sizes: 3.25 to 260 cubic feet Design Options: • Liquid Addition • Polished Contact Surface • CIP - Clean-In-Place Spray Nozzles (more...)

Double Arm Mixers

Double Arm Mixers are based on a combination of 100+ years of ABBE rugged reliability and the latest Aaron Process Double Arm Mixer designs. These mixers are used for mixing plastics, rubber, adhesives, mastics up to 10,000,000 centipoise and solids such as carbon paste, powdered metals and ceramics. Double Arm Mxiers can be jacketed and vacuum rated for drying. Mixer discharge is tilt or bottom dump valves. Our mixer/extrude (more...)


Double Arm Mixer Extruders

Double Arm Mixer Extruders are based on a combination of 100 years of ABBE rugged reliability and the latest Aaron Process Double arm Mixer designs. These mixers are used on plastics, rubber, adhesives, mastics up to 10,000,000 centipoise and solids such as carbon paste, powdered metals and ceramics. Double Arm Mxiers can be jacketed and vacuum rated for drying. Discharge is extrusion screw.  (more...)

CrossMix® Fluidizing Mixer

The CrossMix®  is a twin-paddle mixer that gently lifts and fluidizes solids in a weightless zone where particles of any size or shape can move freely and mix rapidly. Mixing can be completed in as little as 7 to 20 seconds. The CrossMix® is most beneficial for solids that require very high homogeneity, are fragile such a (more...)


Ribbon and Paddle Blenders

Paul O. Abbe Double Ribbon Blender designs and manufacturers new ribbon blenders and are ideal for mixing dry free-flowing solids with bulk densities up to 90 pounds per cubic foot (1.45 g/cc). Ribbon blender are used for all dry foods products, nutraceuticals, protein powder mixes, dry juice mixes, chemicals, fertilizer, insecticides, colorants, resins and polymers. The moderate shear of the ribbon or paddle naturally breaks down lumps an (more...)

Laboratory Mixers

Aaron Process LNG Laboratory Mixers are available in working capacities from 1/4 gallon to 2 gallon. 1/4 gallon and 1 gallon models are available from stock and furnished with variable speed drives, stainless steel construction and jackets as standard. These units are ideal for research and development, testing new raw materials or scaling up production size batches (more...)