A sigma blade mixer extruder is a double arm mixer that discharges by an extruder screw. The screw sits where the saddle would normally be and allows the mixer to be closed through all stages of the process. PAUL O. ABBE has designed and manufactured sigma blade mixer/extruders since 1911 for the rubber, adhesives and food industries. When processing non-flowable materials the mixer/extruder is likely the only reliable method for the process.




How the Extruder Screw Works
The flighted screw is mounted where the saddle would normally be. During mixing the screw runs backwards to keep product in the mixing chamber. To discharge, the screw is reversed and pushes the product out through the screw barrel. The auger screw is typically driven by a variable frequency drive to allow better control of the discharge rate.
Applications
Mixer extruders are used on plastics, butyl rubber, silicone rubber, adhesives, and mastics up to 10,000,000 centipoise, and for solids such as carbon paste, powdered metals, and ceramics. Mixer/Extruders can be jacketed for heating or cooling and vacuum-rated for deaeration.
For tilt and bottom discharge designs and the full description of blade types, see the Sigma Blade Mixers page.
Standard Design
- Materials: Stainless Steel, Carbon Steel, and Abrasion-Resistant (AR400) Steel.
- Sizes: 0.5 to 900 gallons
- Discharge: extrusion screw.
Design Options
- Tilt Discharge
- Bottom Discharge
- Extruder Screw Discharge
- Heating or Cooling Jackets
- Cored Blades
- Liquid Addition
- Vacuum Designs
- ASME Code Stamp
- XP Electrics
- Complete PLC/HMI controls
- Purged Seals
Questions and Answers
What is a mixer extruder?
A mixer extruder is a sigma blade mixer that discharges the batch through an extruder screw. Paul O. Abbe® mixer/extruders are used to mix all types of rubber, adhesives, and mastics up to 10,000,000 centipoise, and solids such as carbon paste, powdered metals, and ceramics, in sizes from 0.5 to 900 gallons.
How does the extruder screw on a sigma blade mixer work?
The flighted screw is mounted where the saddle would normally be. During mixing, it runs backward to hold product in the mixing chamber. To discharge, the screw is reversed and pushes the product out through the screw barrel.
When should I choose a screw discharge on a double arm mixer?
Screw or auger discharge is needed when the material does not flow due to high viscosity or cohesive solids such as carbon paste. The extruder design is also useful when all mixer connections are preferred to be fixed pipes or an enclosed mixer is preferred in order to control volatile vapors.
What is a double arm kneader?
A double arm kneader is another name for a double arm mixer, also called a sigma blade mixer or Z-blade mixer. We build double arm mixers with tilt, bottom, or extruder screw discharge, and offer heating or cooling jackets and vacuum designs.