1-800-524-2188
Search Our Product Line
 
HOME ABOUT US PRODUCT LINES RECONDITIONING SERVICES REPLACEMENT PARTS CONTACT US REQUEST A QUOTE
Product Lines » Abbe Fluid Zone (Forberg Style) Mixers and Dryers

ABBE FLUID ZONE (FORBERG STYLE) MIXERS & DRYERS

The Process

The World's Fastest, Most Effective Mixer
The fastest, most efficient mixing achievable today is realized in the Paul O Abbe “Fluid Zone (Forberg Style)” line. These new mixers, with their distinctive counter-rotating paddle action, represent an entirely new generation in mixer technology. They provide complete homogeneity – a mix variance that is less than 1% - in seconds rather than minutes. And they also prevent re-segregation if mixing cycles are continued beyond completion, even where the particles are of widely differing size and density.

At the conclusion of the cycle, the mix is discharges in bulk through large “bomb bay” doors at the bottom of the mixing chamber, thus eliminating another common opportunity for re-segregation

Mixing / Chemicals
Agro chem Carriers, active agents
Fertilizer Various carriers with fertilizer, peat moss
Bio Fertilizer Lignite powder, broth solution
Scouring Powder Acid Slurry, quartz dust
Detergent powder Carriers, acid slurry, perfume
R & D Various powder + liquid chemicals
Pharmaceuticals Carriers, active agents, enteric binders, lubricants
Colouring Polymers chips, bonding agents, pigments
EPS Coating of chemicals on EPS beads
Chipboards Wood chip and glue
Disposal Wetting of flyash, asbestos dust with mortar
Electrodes Dry electrode powder chemcials
Thermosetting Resins Powdered thermoset resins + additives


Abbe Fluid Zone (Forberg Style) Mixing Advantages

- Extremely Short Mixing Time
- Gelntle Mixing
- Low shear
- Low running cost
- Low maintenance cost
- Precise mixing
- Reliably mixing quality

Product / Applications

Mixing / Animal Feed
Mixing / Building Materials
Mixing / Chemicals
Mixing / Food



Replacement Parts




Downloadable Literature
Electronic Questionnaire

Home | Product Lines | Glossary | Site Map | Inventory | Contact Us | Terms & Conditions
Copyright © 2008 Division of Aaron Engineered Process Equipment
Phone: 630-350-2200 Fax: 630-350-9047

Member of Process Equipment
Manufacturers Association