Ribbon and Paddle Blenders

Paul O. Abbe Double Ribbon Blender designs and manufacturers new ribbon blenders and are ideal for mixing dry free-flowing solids with bulk densities up to 90 pounds per cubic foot (1.45 g/cc). Ribbon blender are used for all dry foods products, nutraceuticals, protein powder mixes, dry juice mixes, chemicals, fertilizer, insecticides, colorants, resins and polymers. The moderate shear of the ribbon or paddle naturally breaks down lumps and agglomerates. Ribbon blenders are extremely efficient and economical.

The double ribbon mixer design moves solids in two directions simultaneously and also rotationally to provide the mixing action. The inner ribbon mixer moves the solids toward the ends of the trough and the outer ribbons move solids toward the middle of the trough. When discharging the solids, the outer ribbons move the solids toward the center discharge valve.

  • Ribbon blenders are effective down to about 25% of fill level. As long as both inner and outer ribbon flights are covered, the back and forth mixing action will occur.
     
  • Lumps and agglomerates cab be broken down by the addition of high-speed lump agitators mounted through the side wall of the trough.
     
  • Liquids can be added directly through the loading grate or with the addition of a liquid spray bar mounted along the length of the touch.
     
  • Jacketing can be added for heating or cooling of the solids. The movement of the solids against the wall provides good heat transfer with the solids.
Paul O Abbe Ribbon Blender

Standard Design:

Contact Materials: 304 Stainless Steel 316L optional
Interior Surfaces: Polished 180 Grit
Support Steel: 304 Stainless Steel
Exterior Surfaces: Glass Bead Blasted
Discharge: Swing away flush valve with pneumatic actuation
Working Capacities: 3 to 1,000 Cubic Feet
Drive: Hollow Bore SEW Eurodrive
Loading: Loading Cover(s) with Welded Grate
Safety: Magnetic Safety Switch(s) on Main Cover
- Lockable Stainless Steel Hold Down Clamps on Main Cover

Design Options:
• 316L Stainless Steel Contact Surfaces
• Heating or Cooling Jackets
• Custom Loading Hatches and Flanges
• Flush Bottom Ball Valve
• Liquid Addition Spray Bar
• CIP - Clean-In-Place Spray Nozzles
• XP Electrics
Controls: Soft Start or VFD in NEMA-12, 4, 4X or 7&9 Enclosures
• High Speed Choppers
• Purged Seals

Ribbon Blender Blades

 

CLICK HERE TO DOWNLOAD CAPACITIES AND DIMENSIONS